Description

condition: new, old surplus

Sold in 5 gallon buckets we have quality checked, since we had a problem with one person and the original 1 gallon cans.

Great for all metals, especially steel.
Does especially well on rust.
We’ve used it trucks, trailers, aluminum and steel (see pics).
When you sand it reduces to a very fine, powder like coating, very hi-end
superior quality to Rust-o-leum.
United Coatings is a longtime trusted industrial name brand.
Home Depot sells rustoleum for $33 per gallon.
Save well over 30%

United Coatings – Shop Koat
Metal Coating Primer oil/solvent based
Dark Gray C74NS0102

Characteristics
Color/Finish: Dark Gray
Curing Mechanism: Solvent Evaporation Oxidation
Drying Schedule @ 77˚ F 50% RH
– to touch 15 minutes
– tack fee 1.5 hours
– recoat 7 hours
Flash Point: 65˚ F
Viscosity: 90-95 KU
Volume Solids: Brownish/Red – 54%
Weight Solids: 74%
Weight Gallons: Brownish/Red – 11.43%
Recommended DFT: 2 to 3 mils

Application
Application Conditions Temperature: Air, surface, material 40˚-120˚ F @ least 5˚ F above dew point
Relative Humidity: 85% maximum
Methods: Brush, conventional spray, airless spray
Airless Spray: Unit 1800-1300 psi
Tip .015″-.019″
Filter 60 mesh
Hose 1/4″
Brush: China bristle, Confie to small areas and touch-up
Conventional Spray: 50 psi atomization pressure, 15-20 psi pressue, Binks gun model 18, air nozzle, 63PB, fluid nozzle 63C or equivalent equipment

Mixing Instructions: Mix paint thoroughly by boxing and stirring or mechanically agitate for uniformity and consistency

Reduction: Airless spray- none
Conventional spray – reduce as necessary only with VOC exempt solvents

Clean Up: Use mineral spirits, following manufacturer’s safety cautions